Skip to main content
High-horsepower performance build strapped down for dyno tuning at Driven Tuning near Matthews, NC
Matthews, NC Area · Dynojet 2WD + Mainline AWD Hub Dyno

Dyno Tested.
Performance Proven.

Professional Dyno Tuning. Custom Engine Builds. Exhaust Fabrication. Performance Upgrades.

Driven Tuning is the automotive performance shop for Matthews, Stallings, Indian Trail, and Charlotte drivers who want results they can see on a graph: professional dyno tuning, AWD hub dyno tuning, custom engine builds, custom exhaust fabrication, suspension upgrades, diagnostics, and performance parts — all under one roof.

2WD + AWD dynos in-house 4 ECU platforms tuned daily E85 flex-fuel calibration

On the dyno

Dynojet 2WD or Mainline AWD hub dyno — every tune starts and ends with a documented pull. Power and torque, not guesswork.

RPM →
Power Torque
Automotive Performance Shop · Matthews, NC

Our Performance Services

From a first dyno tune to a full engine build, every job here is planned around your power goal and verified on our own dynos before the car goes home.

Car making a dyno pull during a tuning session at Driven Tuning

Professional Dyno Tuning

Street and race calibration on our Dynojet 2WD chassis dyno. Hondata, Haltech, AEM, and Link G4X — baseline, tune, and verification pulls, with every session documented in real power and torque numbers.

Dyno tuning details →
Performance car in the Driven Tuning shop for AWD dyno tuning

AWD Hub Dyno Tuning

Our Mainline AWD hub dyno mounts directly to the hubs — no tire slip, and controlled load so we can hold your car at a set RPM and boost while we dial in the map. Built for Evos and other all-wheel-drive builds.

AWD dyno tuning →
Built K-series engine on a stand at Driven Tuning performance shop

Custom Engine Builds & Swaps

K-series and B-series engine builds and swaps, S300 ECU conversions, and complete engine programs for JDM and domestic platforms — assembled for your power goal, then proven on the dyno.

Engine programs →
Custom fabricated manifold and piping at Driven Tuning

Custom Exhaust Fabrication

In-house fabrication: custom exhaust systems, manifolds, turbo piping, and full engine-bay work. When an off-the-shelf part doesn't exist for your combo, we build it here.

Fabrication work →
Turbocharged engine bay build in progress at Driven Tuning

Turbo & Supercharger Builds

Turbo and supercharger installs sized for your goal, plus service and retunes for existing setups — like S2000 CR supercharger service that shows measurable whp gains back on the dyno.

Boost options →
Performance car in for upgrades at Driven Tuning

Suspension Upgrades

Supporting suspension upgrades so the chassis can actually put your new power down — set up for how you drive, whether that's the street, the strip, or the track.

Suspension upgrades →
Technician working on a customer car at Driven Tuning

Diagnostics

Performance-focused diagnostics with data logging and dyno-based troubleshooting — we find what's actually holding your car back before any parts get thrown at it.

Diagnostics →
Performance build parts and engine work at Driven Tuning

Performance Parts

The right parts for your build, sourced and installed by the people who'll tune it — Whipple superchargers, Precision and Full-Race turbo kits, Fuel Injector Clinic injectors, and more.

Performance parts →
Flex-fuel tuned build on the dyno at Driven Tuning

E85 / Flex-Fuel Tuning

E85 and flex-fuel calibration that lets your car pull safely on whatever's in the tank — pump gas to corn, one map.

Flex-fuel expertise →

Not sure which service your build needs? Tell us the car and the goal — we'll map out the right path.

Get My Quote Call (704) 234-8182
HondataHaltechAEMLink G4X Honda / AcuraMitsubishi EvoToyota SupraS2000DSMDodge Hemi HondataHaltechAEMLink G4X Honda / AcuraMitsubishi EvoToyota SupraS2000DSMDodge Hemi
The Driven Tuning advantage

Two dynos. Zero guesswork.

Most shops around Charlotte have one dyno or none. We run a Dynojet 2WD and a Mainline AWD hub dyno in-house — so front-wheel drive, rear-wheel drive, and all-wheel drive cars all get tuned on the right machine, in the same building.

Car on the dyno at Driven Tuning
2WD Dyno Tuning

Dynojet 2WD Chassis Dyno

The industry-standard chassis dyno for front- and rear-wheel-drive cars. Fast, repeatable pulls for baseline, tuning, and before-and-after proof.

  • Baseline, tune, and verification pulls on one dyno
  • Numbers you can compare with other Dynojet sheets
  • Ideal for Hondas, S2000s, Supras, Hemis, and more
All-wheel-drive build at Driven Tuning
AWD Dyno Tuning

Mainline AWD Hub Dyno

A hub dyno bolts straight to the wheel hubs instead of spinning tires on rollers — the right tool for all-wheel-drive and high-power cars.

  • No tire slip — clean data, even on high-boost builds
  • Load control to hold steady-state RPM and boost while tuning
  • Proper AWD tuning for Evos and other all-wheel-drive platforms
Customer performance build in the Driven Tuning shop
Why Driven Tuning

Numbers, not vibes.

  • Two dynos in the building. Our Dynojet 2WD and Mainline AWD hub dyno mean baseline, tune, and verification happen in one place — no trailering your car across town for pulls.
  • Fluent in your ECU. Hondata, Haltech, AEM, Link G4X — we calibrate the platform your build actually runs, not the one we happen to know.
  • JDM to Hemi. Turbo Hondas, Evos, Supras, DSMs — and a Whipple-supercharged 300C that laid down 600 whp on our dyno. Power is power.
  • Fab shop under the same roof. Custom exhaust, manifolds, turbo kits, and engine-bay work built here, so your combo isn't limited to a catalog.

We're not the cheapest tune around Charlotte — we're the shop that dials it in on the dyno until it holds together, and shows you the graph to prove it.

On the lift & on the dyno

Recent work from the shop

How it works

From goal to graph in three steps

01

Tell us the build

Call or send the form with your year, make, model, mods, and power goal. We'll talk through what's realistic and what it takes to get there.

02

Baseline on the dyno

Your car goes on our Dynojet 2WD or Mainline AWD hub dyno for a baseline pull and health check before we touch the map or turn a wrench.

03

Tune, verify, hand back

We calibrate, make back-to-back pulls, and hand you the finished graph. You leave knowing exactly what your car makes.

Service Area

Areas We Serve

Driven Tuning proudly serves Matthews, NC; Stallings, NC; Indian Trail, NC; and Charlotte, NC, and the surrounding areas — with dyno tuning, AWD dyno tuning, engine builds, custom exhaust fabrication, and performance upgrades.

  • Matthews, NC
  • Stallings, NC
  • Indian Trail, NC
  • Charlotte, NC

…and surrounding areas.

Book your session

Ready to put it on the dyno?

Tell us about your car and your goal. We'll call you back to talk options, timeline, and dyno availability — no pressure, no upsell script.

(704) 234-8182
3650 Smith Farm Rd.
Stallings, NC 28104
Get directions →
  • In-house Dynojet 2WD and Mainline AWD hub dyno — baseline and proof pulls on site
  • Hondata, Haltech, AEM & Link G4X calibration
  • Engine builds, turbo, supercharger & flex-fuel builds for JDM and domestic platforms
  • Custom exhaust and fabrication under the same roof

Get My Quote

Takes about 60 seconds. We'll call you within one business day.

Call Now Get Quote Book Dyno Session