Skip to main content
High-horsepower customer build inside the Driven Tuning shop in Stallings, NC
About the shop

The shop behind the graphs.

Driven Tuning is a performance shop in Stallings, NC — your one stop destination for all your performance needs, from the first wrench turn to the final verified dyno pull.

Who we are

Built in the bays. Proven on the rollers.

Driven Tuning specializes in dyno tuning, custom fabrication, and forced-induction builds for JDM and domestic platforms. We're known in the local tuner community around Charlotte for dialing in high-horsepower Evos, Hondas, Supras, and Hemi-powered vehicles — the kind of builds that need more than a canned map.

What sets the shop apart is that everything happens under one roof. Our in-house Mainline AWD dyno means baseline, calibration, and verification never leave the building. Our fab bench means a custom manifold or turbo kit isn't a six-week outsourced wait. And our tuners work daily in Hondata, Haltech, AEM, and Link G4X — the platform your build actually runs.

Turbo K-series Hondas. Supercharged S2000s. Evos and DSMs on E85. A Whipple-supercharged 300C that laid down 600 whp on our rollers. Power is power — and every one of those cars left with a documented graph, not a promise.

We're not the cheapest tune around Charlotte — we're the shop that dials it in on the dyno until it holds together, and shows you the graph to prove it.

Customer performance build being worked on in the Driven Tuning shop
0
ECU platforms tuned
AWD
Mainline dyno in-house
0
whp Whipple Hemi on our rollers
E85
Flex-fuel calibration
What's under the roof

Everything a serious build needs, in one building

In-house AWD and standard dyno tuning for street and race builds, including ECU calibration on Hondata, Haltech, AEM, and Link G4X. Every session is documented with real pulls — power and torque you can see, compare, and keep.
Custom fabrication work including manifolds (AAfab), turbo kits, and full engine-bay builds. When an off-the-shelf part doesn't exist for your combo, we build it here instead of compromising the setup.
Turbo and supercharger installation and maintenance — Whipple superchargers, Precision and Full-Race turbos, Fuel Injector Clinic injectors — with the supporting fuel system sized for your actual power goal, not a guess.
Engine swaps and builds — K-series, B-series, S300 ECU conversions — plus supporting suspension upgrades, for JDM and domestic platforms alike.
Supercharger service and retuning that shows up on the graph — like S2000 CR supercharger maintenance yielding measurable whp gains back on the rollers.
Fluency, not familiarity

The platforms we live in

A tune is only as good as the tuner's command of the ECU. These are the calibration platforms we work in daily, plus the specialties that keep the local tuner community coming back:

Hondata Haltech AEM Link G4X JDM tuning Ethanol / flex-fuel AWD Mainline dyno testing Turbo & supercharger builds Custom fabrication Mopar / Hemi supercharger tuning
Car strapped to the Mainline AWD dyno mid-pull at Driven Tuning
What rolls through the bays

Brands & platforms we service

Honda Acura S2000 Mitsubishi Evo Toyota Supra DSM — Eclipse / Talon Dodge / Chrysler Hemi (300C)

From a turbo K-swap civic-class build to a Whipple-blown Hemi sedan, the process is the same: baseline it, build it, calibrate it, and prove it on the rollers before it leaves.

Turbocharged engine bay build in progress at Driven Tuning in Stallings, NC
How we work

Three things every customer can count on

01

The dyno never lies

Every tune starts with a baseline pull and ends with a verified one on our Mainline AWD dyno. You get the graph — before and after — not a story.

02

One roof, no hand-offs

Build, fabrication, forced-induction install, and calibration all happen here. Nothing gets trailered across town, and nothing gets lost between shops.

03

Your platform, respected

JDM or domestic, Hondata or Haltech, pump gas or E85 — we tune the combination you actually built, with parts and maps chosen for your goal.

Service area

Areas We Serve

Driven Tuning proudly serves performance customers across the Charlotte region:

  • Matthews, NC
  • Stallings, NC
  • Indian Trail, NC
  • Charlotte, NC

...and surrounding areas.

Let's talk about your build

Come see the shop. Leave with a plan.

Tell us your platform, mods, and power goal — we'll call you back to talk options, timeline, and dyno availability. No pressure, no upsell script, and the graph to back up whatever we do.

(704) 234-8182
3650 Smith Farm Rd., Stallings, NC 28104
Call Now Get Quote