The platforms we know cold.
Some shops tune whatever rolls in. We go deep on specific platforms and ECU systems — turbo Hondas, Evos, Supras, DSMs, and Whipple-blown Hemis — calibrated on our in-house Mainline AWD dyno with the graph to prove it.
Four platforms. One standard: dialed in on the dyno.
Your tune is only as good as your tuner's fluency in the software. We calibrate Hondata, Haltech, AEM, and Link G4X daily — street and race maps, verified with back-to-back pulls on our Mainline AWD dyno.
Hondata — the Honda / Acura backbone
Our bread and butter for Honda and Acura calibration — from naturally aspirated street setups to high-boost turbo K-series and B-series builds. We also handle S300 ECU conversions as part of engine swap and build programs.
Every Hondata session runs the same way: baseline pull, calibration on the rollers, then verification pulls so you leave with documented power and torque, not a guess.
Typical Hondata work here
- Turbo K-series and B-series calibration
- S300 ECU conversions for swaps
- Street and race maps
- E85 / flex-fuel Honda setups
Haltech — standalone control for serious builds
When a build outgrows the factory computer, Haltech standalone engine management gives us full authority over fuel, spark, and boost. We calibrate Haltech on forced-induction JDM and domestic combos where precise control is the difference between a strong pull and a broken engine.
Standalone setups get the same treatment as everything else in the shop: mapped and verified on our in-house AWD dyno.
Typical Haltech work here
- High-horsepower turbo builds
- Standalone conversions on swapped platforms
- Boost control and race calibration
- Flex-fuel standalone setups
AEM — proven engine management for JDM iron
AEM engine management has long been a staple on JDM performance platforms, and we tune it fluently — the same documented-pull process, the same street-or-race calibration options, on the ECU your build already runs.
If you're deciding between staying on AEM or moving platforms, we'll give you a straight answer based on your combo and power goal — not based on what's easiest for us.
Typical AEM work here
- Turbo Honda / Acura calibration
- DSM and Evo engine management
- Street and race maps
- Retunes after parts changes
Link G4X — modern standalone flexibility
Link G4X rounds out our standalone lineup — a modern ECU platform we calibrate for street and race builds across JDM and domestic applications. Full fuel, ignition, and boost calibration, tuned and verified on the rollers.
Not sure whether your build calls for G4X, Haltech, or staying OEM-based with Hondata? That's exactly the conversation to have before you buy hardware — call us first.
Typical Link G4X work here
- Standalone installs and base setup
- Forced-induction calibration
- Flex-fuel mapping
- Dyno verification pulls
Honda, Evo, Supra, DSM — our home turf.
Driven Tuning built its name in the local tuner community dialing in high-horsepower JDM platforms. If it came from Japan and makes boost, odds are we've had one strapped to the rollers.
- Honda / Acura. Turbo K-series and B-series builds, engine swaps, S300 conversions, and supporting suspension upgrades.
- S2000. Including CR supercharger maintenance and retunes that come back with measurable whp gains on the dyno.
- Mitsubishi Evo. High-horsepower Evo calibration — AWD, tuned on an AWD dyno, the way it should be.
- Toyota Supra. Big-power straight-six builds calibrated for street or race duty.
- DSM (Eclipse / Talon). Turbo 4G63 setups tuned on the platform's classic and standalone ECU options.
JDM shop? Sure. But power is power.
Domestic muscle gets the same treatment as the imports. Our Hemi specialty centers on supercharged Mopar builds — like the Whipple-supercharged Chrysler 300C that laid down 600 wheel horsepower on our rollers.
- Whipple supercharger installs and maintenance on Hemi platforms.
- Supercharger retunes after pulley, fuel, or supporting-mod changes.
- Fuel system upgrades with Fuel Injector Clinic injectors sized to the goal.
Pump gas to corn. One map.
E85 unlocks power and knock resistance that pump gas can't touch — but only with a calibration that handles it properly. We build flex-fuel maps across our ECU platforms so your car pulls safely on whatever's in the tank.
- Full E85 calibration for dedicated ethanol setups chasing maximum safe power.
- True flex-fuel maps that blend seamlessly between pump gas and E85 — no swapping tunes at the pump.
- Fuel system matching. Injectors and supporting fuel mods sized for ethanol's higher volume demands.
- Verified on the rollers — before-and-after pulls so you see exactly what the fuel is worth on your combo.
The Mainline AWD dyno is in the building.
Most shops tune AWD cars by trailering them somewhere else — or worse, by street-tuning and hoping. Our Mainline AWD dyno lives in-house, so Evos, all-wheel-drive builds, and everything else get baselined, calibrated, and verified in one place.
- True AWD capability. All four wheels loaded — no drivetrain disconnects, no compromise pulls.
- Baseline before, proof after. Every tune starts with a health-check pull and ends with a documented graph.
- Street and race sessions. Repeatable, controlled load testing you can't get on the road.
When the catalog runs out, the fab shop starts.
Specialty combos need parts nobody sells. Our in-house fabrication — including AAfab manifold work — means your build isn't limited to what's on a shelf.
- Custom manifolds built for your turbo, your engine bay, your power goal.
- One-off turbo kits around Precision and Full-Race hardware.
- Full engine-bay builds — fabrication, forced induction, and tuning under one roof.
Is your platform on this page? Let's talk numbers.
Tell us your car, your mods, and your power goal. We'll give you a straight answer on what's realistic, what it takes, and when we can get you on the rollers — no pressure, no upsell script.
(704) 234-8182